Multi-Beam Packing Support – Various Opening and Multi-Materials

MBPS-01: Multi-beam packing support is ideal for random packing support.

Multi-beam packing support, as its name says, is made of several support beams. It can be made of metallic (carbon steel, stainless steel), plastic (PP, PVDF, CPVC), fiber reinforced plastic (FRP) and ceramic materials. Multi-beam packing support is widely used in the absorption tower, washing tower and distillation towers for random packing support. It has high open area, extremely low pressure drop and separated gas and liquid paths for high mass transfer efficiency.

Structure
The multi-beam packing support is regarded as one of the best random packing support grids.

• 290 mm fixed width. It is assembled with several support beams, which has 290 mm width and 250–300 mm height.
• 10 mm fixed liquid drainage distance. Each neighbor beam are set an 10 mm pitch for liquid drainage.
• Smaller than 10 mm opening size. The slot, square or round openings on the beam are smaller than 10 mm, which can prevent the 10 mm packing leaking.
• Sectional design. Sectional design for easy transporting and installing and entering from manway.
• Separated channel for liquid and gas. Gas rises from the beam top and liquid flow down from the flat way to supply extremely low pressure drop.
• With or without outer frame. The multi-beam packing support can be designed with or without outer frame to suit different diameters of packing tower.

MBPS-02: Slot opening multi-beam packing support.

MBPS-03: Square opening multi-beam packing support.

MBPS-04: Round opening multi-beam packing support.

Specifications

• Material: metallic, plastic, ceramic, graphite.
• Opening pattern: round, slot and various other customized patterns.
• Diameter: maximum is 10 m.
• Operating temperature:
  • Stainless steel packing support < 300 °C.
  • Carbon steel packing support < 200 °C.

MBPS-05: Stainless steel multi-beam packing support.

MBPS-06: PP multi-beam packing support.

Installation
The multi-beam packing support is ideal for random packing support, especially the ring shape and saddle shape packings.

• Tower diameter < 1200 mm, the packing tower is equipped with multi-beam packing support with frame.
• Tower diameter > 1200 mm, the multi-beam packing support without frame is better for that.

MBPS-07: Multi-beam packing support without frame is suitable for larger diameter packing tower.

MBPS-08: Multi-beam packing support with frame is suitable for smaller diameter packing tower.

Features

• Excellent stiffness. High loading capacity to bear the extremely high pressure from packings and flowing liquids.
• Lightweight and economical. Metallic, plastic, ceramic and graphite materials for choice to suit different environments.
• Large open area. Stereochemical structure of multi-beam packing can help to enlarge open area, which can reach 100%.
• Wide range of opening available. Round, slot and various other opening patterns can be customized according to specific condition and requirements.
• Sectional design. Sectional design is standard for larger towers with manways. And this design make it easy for transporting and installation.
• Low pressure drop. The liquid and gas are moving through different path to avid the flowing interference. It can remain low pressure drop even under the high liquid and gas loading.
• Extremely high flux. The flux of liquid and gas of multi-beam packing support is superior to any types of supporting grid.
• High mass transfer efficiency. Special design make the liquid and gas evenly distributed and ensure the high mass transfer performance for the tower.

Applications

• It is suitable for different packing towers:
  • Absorption tower.
  • Scrubbing tower.
  • Distillation tower.
• It is widely used in various industries:
  • Refining.
  • Chemical.
  • Fertilizer.
  • Ethylene.
  • Oxygen.