SS 316 & 316L demister pad with thickness 100 - 583 mm

  • Rectangular demister pad for mist eliminator, 18 inch width × 6 feet long × 6 inch thick, 316 SS, mesh blanket, crinkled wire, York mesh style 421.
  • Demister frames 316L stainless steel A 240-316 with demister size (mm): 2054 × 470, 2054 × 357, 1226 × 470, 1376 × 470, 1276 × 470, 1130 × 470, 1130 × 357, 1226 × 357, 1226 × 470, 1226 × 357, 1376 × 357, 1356 × 470, 1356 × 357, etc.
  • 316L SS demister pad mesh 431 type, 152 mm thk × 144 kg/m3 × 0.247 mm wire diameter, demister size: 2140 mm long × 1680 mm wide.
  • Demister pad stainless steel 316 with 30 layer of knitted wire mesh, corrugated, 0.25 mm two wire × 5 mm web loop.
  • 316L stainless steel demister pad with diameter 300 mm - 6400 mm.
  • Stainless steel 316 knitted mesh pads, 4" × 4" square size, can be supported with thickness 0.25" or 0.375".
  • SS 316L demister pad with grids, 100 mm thick, 9 lb/cu.ft , demister diameter 914 mm for condensate stabilizer.
  • SS 316L demister pad, 100 mm thick, 9 lb/cu.ft, demister diameter 150 mm for condensate flash separator.
  • 316 SS mesh pad, 6" thickness, 0.011" pad diameter, 12 lb per cubic feet, mesh pad fit in to 20" outside diameter (0.594" wall thickness) vessels, removal efficiency: 99.7% of 10 micron and greater.
  • 316 SS demister pad to fit in a 5" sch. 40 pipe 4" thick.
  • Stainless steel 316L knitted wire mesh, size: 1778 mm length × 562 mm × 105 mm height. Density: 83.87 kg/ m3. Free volume: 99%.
  • Stainless steel 316L knitted wire mesh, size: 2158 mm length × 562 mm × 105 mm height. Density: 71.06 kg/m3. Free volume: 99%.
  • 316 SS demister pad with 948 mm pad diameter and 583 mm thickness.
  • 316 SS demister pad with 945 mm pad diameter and 153 mm thickness.
  • 316 SS demister pad with 758 mm pad diameter and 153 mm thickness.
  • SS 316 demister pad with diameter 2900 mm for gas cooling tower, type Euroform filter (vane section).
  • Stainless steel 316L demister pad with size 890 m × 470 mm and 1160 mm × 470 mm.
  • SS 316 demister pad include grid, 1650 mm diameter and 150 mm thickness.
  • SS 316L demister pad, size ID 1800 mm × OD 1760 mm × 100 mm thickness.
  • SS 316L demister pad, size ID 1500 mm × OD 1460 mm × 100 mm thickness.
  • SS 316L demister pad, size ID 2000 mm × OD 1960 mm × 100 mm thickness.
  • SS 316L demister pad, size ID 1100 mm × OD 1060 mm × 100 mm thickness.
  • SS 316L demister pad, size ID 2500 mm × OD 2460 mm × 100 mm thickness.
  • SS 316L demister pad, size ID 800 mm × OD 760 mm × 100 mm thickness.
A half rolled SS demister pad is on the table.
SS demister pad with pad size 25' length and 6" width.
A roll of silver white SS 316 demister pad with grids.
Demister pad without grids.
  • 316L demister pad.
    • Mesh thickness: 152.4 mm.
    • Demister pad diameter: 1066.8 mm.
    • Grid of top and bottom thickness: 50.8 mm.
    • Grid material: 316L.
    • Mesh type: 9797.
    • Number of segments: 3.
  • Demister pad 316L.
    • Wire diameter: 0.275 mm.
    • Demister pad diameter: 4200 mm.
    • Demister pad thickness: 200 mm.
    • Density of wire mesh: 145 kg/m3.
    • Porosity: 98.2%.
  • Demister pad.
    • Wire diameter: 0.275 mm.
    • Demister pad diameter: 550 mm.
    • Demister pad thickness: 200 mm without grids.
    • Top and bottom grids size: 25 mm height × 3 mm thickness.
    • Density of wire mesh: 145 kg/m3.
    • Porosity: 98.2%.
    • Number of segments: 29.
    • Demister and grids material: SS 316L.
  • SS 316L demister pad.
    • Size: 2140 × 1680 × 152 mm.
    • Density: 144 kg/m3.
    • Wire diameter: 0.247 mm.
  • SS 316L demister pad.
    • Size: 1400 × 305 × 152 mm.
    • Density: 144 kg/m3.
    • Wire diameter: 0.28 mm.
  • SS 316L demister pad.
    • Size: 1675 × 305 × 152 mm.
    • Density: 144 kg/m3.
    • Wire diameter: 0.28 mm.
  • SS 316L demister pad.
    • Size: 1960 × 305 × 152 mm.
    • Density: 144 kg/m3.
    • Wire diameter: 0.28 mm.
  • SS 316L demister pad.
    • Size: 1981 × 305 × 152 mm.
    • Density: 144 kg/m3.
    • Wire diameter: 0.28 mm.
  • SS 316L demister pad.
    • Size: 2000 × 305 × 152 mm.
    • Density: 144 kg/m3.
    • Wire diameter: 0.28 mm.
  • SS 316L demister pad.
    • Size: 2590 × 305 × 152 mm.
    • Density: 144 kg/m3.
    • Wire diameter: 0.28 mm.
  • Demister pad SUS 316.
    • Wire diameter: 0.25 mm.
    • Length: 50 m.
    • Width: 680 mm.
    • Thickness: 150 mm.
  • Demister pad: 2 ft width × 10 ft length × 4 in thick, 316 SS.
    • Material: 316 SS.
    • Shape: rectangular.
    • Contact area: 278 m2/m3.
    • Free volume: 98.2%.
  • SS 316 demister pads.
    • Demister pad size: 36" diameter × 6" thick.
    • Demister pad size: 24" diameter × 4" thick.
    • Demister pad size: 48" diameter × 6" thick with two sections.
    • Efficiency: 98% removal efficiency of droplet larger than 10 microns.
  • 316 SS rectangular demister pad.
    • Wire diameter: 33 SWG.
    • Thickness: 100 mm.
    • Pad size: 500 mm width × 546 mm length, 546 mm width × 630 mm length.
    • Density: 191 kg/m3.
    • Void ratio: 97.5%.
  • 316 SS rectangular demister pad.
    • Wire diameter: 33 SWG.
    • Thickness: 10".
    • Pad size: 2 feet wide × 4 feet long.
    • Density: 145 kg/m3.
    • Free volume: 98%.
  • 316 SS rectangular demister pad.
    • Wire diameter: 33 SWG.
    • Thickness: 100 mm.
    • Pad size: 440 mm wide × 546 mm feet long.
    • Density: 191 kg/m3.
    • Void ratio: 97.5%.
  • Demister pad with grid.
    • Pad thickness: 100 mm.
    • Wire diameter: 0.23 or 0.28 mm.
    • Wire mesh material: AISI 316.
    • Grating material: AISI 316l.
    • Free volume of mat: 97%.
  • 316 SS demister pad.
    • Pad size: 2 ft width × 10 feet length × 4 in thickness.
    • Shape: rectangular.
    • Contact area: 278 m2/m3.
    • Free volume: 98.2%.
  • Material SS 316 demister pad.
    • Mesh pads size: diameter 24" × 150 thick (high pressure).
    • Mesh pads size: diameter 8" × 150 thick (medium pressure).
    • Mesh pads size: diameter 8" × 150 thick (low pressure).
  • Demister pad mesh type 431 made of 316L SS wire, 144 kg/m3, 28 mm wire diameter.
    • Demister size 1400 mm long × 305 mm wide × 152 mm thick.
    • Demister size 1675 mm long × 305 mm wide × 152 mm thick.
    • Demister size 960 mm long × 305 mm wide × 152 mm thick.
    • Demister size 1981 mm long × 305 mm wide × 152 mm thick.
    • Demister size 2000 mm long × 400 mm wide × 152 mm thick.
    • Demister size 2000 mm long × 500 mm wide × 152 mm thick.
    • Demister size 2590 mm long × 305 mm wide × 152 mm thick.
  • Grade SS 316L demister pad without grids.
    • Wire diameter: 0.15 mm.
    • Demister pad length: 20000 mm.
    • Demister pad width: 400 mm.
    • Demister pad depth: 50 mm.
    • Demister density: 144 kg/m3.
    • Surface area: 480 m2/m3.
    • Free volume: 98.2%.
    • No of sections: 1.
  • Demister pad DN591 with koch style 194.
    • Material: AISI 316L.
    • Demister pad diameter: 591 mm.
    • Demister pad thickness: 100 mm
    • Demister pad with grids thickness: 150 mm.
    • Grid specification: flat bars: 25 × 3 mm, rod bars 6 mm.
    • Other requirements: including 4 bolts completely for installation.
  • SS 306 demister pad.
    • Wire diameter: 33 SWG.
    • Demister pad thickness: 6".
    • Demister pad size: 10' × 2'.
    • Density: 144 kg/cu.m.
    • Open area: 98%.
  • 316L demister pad with grids used in drying tower for separation H2SO4.
    • Demister pad diameter: 4572 mm.
    • Material: stainless steel 316L Knitted.
    • Demister pad thickness (28 layers): 150 mm.
  • AISI 316 demister pad.
    • Demister pad diameter: 400 mm.
    • Demister pad thickness: 150 mm.
    • Contact area: 442 m2/m3.
    • Free volume: 96.90%.
  • AISI 316 demister pad.
    • Demister pad diameter: 350 mm.
    • Demister pad thickness: 150 mm.
    • Contact area: 442 m2/m3.
    • Free volume: 96.90%.
  • AISI 316 demister pad.
    • Demister pad diameter: 320 mm.
    • Demister pad thickness: 150 mm.
    • Contact area: 442 m2/m3.
    • Free volume: 96.90%.
  • SS 316 demister pad.
    • Wire mesh: 40 mesh.
    • Pad thickness: 0.01" (0.254 mm).
    • Pad diameter: ID 2134 mm.
    • Pad and grid material: SS 316.
    • Surface area: 3.577 m2.
  • SS 316 demister pad.
    • Wire mesh: 4 mesh.
    • Pad thickness: 0.047" (1.193 mm).
    • Pad diameter: ID 2134 mm.
    • Surface area: 3.577 m2.

QUICK CONTACT

If you need to consult the price, please contact the business department by E-mail:

When you contact us, please provide your detail requirements. That will help us give you a valid quotation.